G-2. Adjust Channel Settings
and ACQUIRE buttons
are selected on the main
toolbar.
button on the main
toolbar.
3
Select CHANNELS.
set pinhole size
(typically, 1-1.5 Airy
units).
Use Channel Settings
to adjust settings for
each channel.
5) Use Excitation to set
transmission % for the
laser lines you need.
approximation when setting
excitation, the Ar lines should
be set to ~5%. Setting 100%
543 and 20% 633 will result in
Additional wavelengths
can be selected under
LASERLINE.
2/27/2008
14
Comments to this Manuals