Zeiss OPMI Pentero User Manual

OPMI® Pentero®Software Release 2.2Brief instructionsG-30-1702-enIssue2.0Printed on 17. 03. 2008

10G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Central user interface (touchscreen)Note:For detailed information

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200811Menu structureThe menu is structured as follows:MENUThe main menu

12G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008IlluminationWarning!Before starting, make sure to read the notes

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200813Lamp changeOpen the cover. The lever for changing the lamp moves

14G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Adjusting the position of the handgripsYou can adjust the positio

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200815Configuring the handgripsYou can trigger the functions of the sur

16G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Configuring the foot control panelYou can trigger the functions o

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200817Mounting the tube and eyepiecesWarning!Change the modules and acc

18G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Attaching documentation / coobservation equipment• Loosen knurled

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200819Adjusting the tubes and eyepieces1 Adjusting the interpupillary d

2G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008ContentsKey to symbols Page 3Powering up and positioning the syste

20G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Setting the eyepieces (compensation for ametropia)Bring the surgi

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200821Setting the adjustment speeds of focus and zoomPress the focus or

22G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Exporting patient data to CD/DVD/USB stick/DICOM• Open PAT-FILES

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008231!Files are being transferred This process may take a few minutes

24G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Connecting an external monitorCaution:Only connect the monitor to

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200825BNC1Y/C2

26G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008What to do in an emergency 1Failure of illumination - changing th

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008277 Failure of control functions:• Set emergency switch (7) to the

28G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Emergency instructions - overviewIllumination failure - changing

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200829123

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 20083Caution:These brief instructions are only an excerpt from the comp

30G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Failure of the zoom functionFailure of the zoom function while al

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200831Failure of the focusing functionFailure of the focusing function

32G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Failure of the magnetic brakesIf the magnetic brakes fail (magnet

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200833If no power is available over a prolonged period of time, the sys

34G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Failure of all control functions (Emergency mode)• Check whether

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200835Individual magnetic brakes are blocked (OPMI can not be moved at

36G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008CE labelThe system meets the essential requirements stipulated in

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Index 37IndexAAdjustment speeds of focus and zoom, setting of 21Arc

38 IndexG-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008IIndividual magnetic brakes are locked 35Interpupillary dis

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 200839

4G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Switching on the systemWarning!– The correct use of the system is

Carl Zeiss Surgical GmbHA Carl Zeiss Meditec Company73446 OberkochenGermanyFax: ++49 (0) 7364-20 48 23Email: [email protected]: www.m

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 20085Positioning the microscopeWarning!For safety reasons, the system m

6G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Positioning the system at the operating tableThe stand is provided

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 20087345656

8G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 2008Attaching sterile drapes Caution:When attaching the drape, please

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0Printed on 17. 03. 20089Balancing the systemWarning!Make sure to observe the instructions